SWEET CUPCAKE

SWEET CUPCAKE

In Stock
Part Number:79-619
You need to be a registered customer to order this product. Please Login to your account or click here to Register.
SWEET CUPCAKE 5” WIDE X 6.75" HIGH
PINK, LT PURPLE, LIME, BROWN AND  COPPER RHINE STUDS

DIY APPLICATION INSTRUCTIONS:

Although we are providing instructions for application using a household iron, this product is best applied using a heat seal machine. If you do not have access to a heat seal machine, you may use the following instructions. Please note that we recommend hand wash and line dry for garments that are decorated using a home iron.


♥ PLACE GARMENT ON A SOLID STEADY SURFACE SUCH AS A TOWEL COVERED FLOOR OR COUNTER TOP (IRONING BOARD NOT RECOMMENDED)

♥ USING A FIRM PIECE OF CARDBOARD COVERED WITH ALUMINUM FOIL OR TEFLON, PLACE IT INSIDE THE GARMENT DIRECTLY UNDER THE APPLIQUE.

♥ PLACE APPLIQUE FACE DOWN ON DESIRED LOCATION ON GARMENT

♥ SET IRON ON COTTON SETTING - 350°F (HIGH)

♥ SET IRON TO “DRY” - DO NOT USE STEAM WHEN APPLYING ANY APPLIQUE

♥ COVER THE APPLIQUE AREA WITH A THIN PROTECTIVE COTTON COVER SUCH AS A PIECE OF PILLOW CASE FABRIC (1 LAYER)

♥ PRESS DOWN VERY HARD IN A VERY SLOW CIRCULAR MOTION COVERING THE AREA OF THE TRANSFER FOR A MINIMUM OF 2 CONTINUOUS MINUTES.

♥ ALLOW GARMENT TO COOL COMPLETELY (COLD TO THE TOUCH)

♥ TURN THE GARMENT INSIDE OUT AND REPEAT THIS PROCESS, INCLUDING THE CARDBOARD INSERT AND THE PRESSCLOTH OVER THE APPLIQUE

♥ ALLOW GARMENT TO COOL COMPLETELY (COLD TO THE TOUCH)

♥ TURN THE GARMENT RIGHT SIDE OUT AND SLOWLY PEEL THE TRANSFER – IF YOU SEE ANY STUDS OR STONES THAT COME UP STILL ON THE TAPE, ALLOW THE TAPE TO FALL BACK IN PLACE AND REPEAT THE PROCESS. 

HINTS & TIPS:   

• Do not lay the studs or stones over thick seams, zippers or pockets.

• Do not apply the applique onto water proof or water proof treated surfaces such as rain-wear.

• Works best on cotton and poly cotton fabrics, fleece and cotton knits. Test part of the fabric first to see if it will withstand the required heat and pressure necessary to easily apply the design.


APPLICATION INSTRUCTIONS FOR PROFESSIONALS, MANUFACTURERS AND CONTRACTORS:

♥ PREHEAT PROPERLY FUNCTIONING HEAT SEAL MACHINE TO 350°F (HIGH)

♥ MAKE SURE PRESSURE IS SET TO HIGH (60PSI)

♥ PLACE APPLIQUE FACE DOWN ON DESIRED LOCATION ON GARMENT

♥ PLACE BOTH ON THE HEAT SEAL MACHINE, CENTERED UNDER THE HEAT PLATTEN

♥ CLOSE MACHINE AND SET TIME FOR 15 SECONDS

♥ REMOVE GARMENT FROM MACHINE AND ALLOW TO COOL COMPLETELY (COLD TO THE TOUCH)

♥ SLOWLY PEEL THE TRANSFER – IF YOU SEE ANY STUDS OR STONES THAT COME UP STILL ON THE TAPE, ALLOW THE TAPE TO FALL BACK IN PLACE AND REPEAT THE PROCESS. 

HINTS & TIPS:   

• Do not lay the studs or stones over thick seams, zippers or pockets.

• Do not apply the applique onto water proof or water proof treated surfaces such as rain-wear.

• Works best on cotton and poly cotton fabrics, fleece and cotton knits. Test part of the fabric first to see if it will withstand the required heat and pressure necessary to easily apply the design.


IMPORTANT INFORMATION PLEASE READ:

Once your order is produced and shipped, errors in manufacturing or materials must be declared within 5 business days of receipt. No returns will be accepted without prior approval and any returns not displaying a RETURN AUTHORIZATION NUMBER will be refused. All returns MUST reference the specific invoice number for that return. Any issues concerning problems with application or performance must be reported within 30 days of receipt of your order. Because we have no control over the environment in which your goods are stored or how they are handled after being received, we cannot address or accept any returns for any reason after 30 days.

Related Items

Recently Viewed Items

Subscribe
Unsubscribe