POP! (SEQUINS) 9"W X 7.5"H

POP! (SEQUINS) 9"W X 7.5"H

In Stock
Part Number:23-034
You need to be a registered customer to order this product. Please Login to your account or click here to Register.



• A household iron NO STEAM.
• A pressing cloth (single layer of thin cotton fabric such as an old tee shirt)
• A firm piece of cardboard covered in aluminum foil or Teflon.
♥ Set iron to "dry" not steam setting.
♥ Pre-heat to cotton setting NO STEAM. STEAM will kill it! :(
♥ Position your patch as desired and cover with the pressing cloth.
♥ Place the cardboard backing underneath between your garment or project and the iron board. The backing board helps reflect heat back to the patch and garment rather than drawing heat into the ironing board cover speeding up the process and ensuring a flat, secure bond.
♥ From the front of the patch, press the iron flat using an up and down, vertical motion (do not move back/forth/around!) for 25 to 40 seconds to tack the patch in place using the center part of your iron.
♥ Turn inside out or upside down (if possible) and still using the pressing cloth, repeat from reverse side for 30 to 45 seconds.
♥ ALLOW the patch and your item to cool, completely. Test an edge of the patch with your fingernail(careful) or tweezers to ensure it is secure. If not, repeat increasing the amount of time 10% - 20% each time taking care to ensure the patch and fabric are protected. The goal is to melt the glue into the fiber without scorching or burning the fabric or the patch. 

WARNING! Do not remove the patch if you fail on your first attempt or you will damage the adhesive. Just repeat the steps with additional time. Some household irons just don't get hot enough as they do not have temperature gauges. 

Professional Heat Seal Application:

Covering garment with Teflon is suggested, but not required.

350 Degrees Fahrenheit / Heavy Pressure / 30 seconds / 60 PSI

IMPORTANT INFORMATION PLEASE READ___________________________________________________________________________

Once your order is produced and shipped, errors in manufacturing or materials must be declared within 5 business days of receipt. No returns will be accepted without prior approval and any returns not displaying a RETURN AUTHORIZATION NUMBER will be refused. All returns MUST reference the specific invoice number for that return. Any issues concerning problems with application or performance must be reported within 30 days of receipt of your order. Because we have no control over the environment in which your goods are stored or how they are handled after being received, we cannot address or accept any returns for any reason after 30 days.

Related Items

Recently Viewed Items